Operation - HP procurve series 4100gl Management And Configuration Manual

Operation

Stacking Features
Feature
view stack status
view status of a single switch
view candidate status
view status of commander and its
stack
view status of all stacking-enabled
switches in the ip subnet
configure stacking
enable/disable candidate Auto-Join
"push" a candidate into a stack
configure a switch to be a commander n/a
"push" a member into another stack
remove a member from a stack
"pull" a candidate into a stack
"pull" a member from another stack
convert a commander or member to a
member of another stack
access member switches for
configuration and traffic monitoring
disable stacking
transmission interval
HP Procurve Stack Management (termed stacking) enables you to use a single
IP address and standard network cabling to manage a group of up to 16 total
switches in the same IP subnet (broadcast domain). Using stacking, you can:
Reduce the number of IP addresses needed in your network.
I
HP Procurve Stack Management
Default Menu
n/a page 14-26
thru
page 14-28
n/a
n/a
n/a
enabled/Yes page 14-15 page 14-37
n/a page 14-15 page 14-37
page 14-13 page 14-33
n/a page 14-24 page 14-39
n/a page 14-21 page 14-40
n/a page 14-17 page 14-36
n/a page 14-19 page 14-38
n/a page 14-24 page 14-39
n/a page 14-23 page 14-42
enabled page 14-15 page 14-44
60 seconds page 14-13 page 14-44

Operation

CLI Web
page 14-31 page 14-45
page 14-31
page 14-32
page 14-32
or
page 14-41
14-3