HP procurve series 4100gl Management And Configuration Manual page 382

HP Procurve Stack Management
Configuring Stack Management
Figure 14-24. Result of Using the Show Stack All Command To List Discovered Switches in the IP Subnet
14-32
Viewing the Status of all Stack-Enabled Switches Discovered in the IP
Subnet. The next example lists all the stack-configured switches discovered
in the IP subnet. Because the Series 4100GL switches on which the show stack
all command was executed is a candidate, it is included in the "Others"
category.
Syntax: show stack all
Viewing the Status of the Commander and Current Members of the
Commander's Stack. The next example lists all switches in the stack of the
selected switch.
Syntax: show stack view
Figure 14-25. Example of the Show Stack View Command To List the Stack
Assigned to the Selected Commander