HP procurve series 4100gl Management And Configuration Manual page 154

Time Protocols
SNTP: Viewing, Selecting, and Configuring
Figure 8-1. The System Information Screen (Default Values)
8-6
[E]
2. Press (for Edit ). The cursor moves to the
Use [v] to move the cursor to the
3.
4. Use the Space bar to select
to the field.
SNTP Mode
5. Do one of the following:
• Use the Space bar to select the
move the cursor to the
Broadcast mode details, see "SNTP Operating Modes" on page 8-
2.)
• Use the Space bar to select the
following:
Press [>] to move the cursor to the
i.
Time Protocol Selection Parameter
– TIMEP
– SNTP
– None
System Name
Time Sync Method
, then press [v] once to display and move
SNTP
mode, then press [v] to
Broadcast
field, and go to step 6. (For
Poll Interval
Unicast mode, then do the
Server Address
field.
field.
field.