HP procurve series 4100gl Management And Configuration Manual page 163

Figure 8-9. The System Information Screen (Default Values)
[E]
2. Press (for Edit ). The cursor moves to the
Use [v] to move the cursor to the
3.
4. If is not already selected, use the Space bar to select
TIMEP
press [v] once to display and move to the
5. Do one of the following:
• Use the Space bar to select the
the cursor to the
• Use the Space bar to select the
Press [>] to move the cursor to the
i.
ii. Enter the IP address of the TimeP server you want the switch to
use for time synchronization.
TimeP: Viewing, Selecting, and Configuring
Time Protocol Selection Parameter
– TIMEP (the default)
– SNTP
– None
Time Sync Method
TimeP Mode
mode, then press [v] to move
DHCP
field, and go to step 6.
Poll Interval
Manual mode.
Time Protocols
System Name field.
field.
TIMEP
field.
Server Address field.
, then
8-15