Using The Web Browser Interface To Implement Configuration; Changes - HP procurve series 4100gl Management And Configuration Manual

Rebooting To Activate Configuration Changes. Configuration changes
for most parameters become effective as soon as you save them. However,
you must reboot the switch in order to implement a change in the
VLANs to support
(To access these parameters, go to the Main menu and select 2. Switch
Configuration, then 8. VLAN Menu, then
If configuration changes requiring a reboot have been made, the switch
displays an asterisk (*) next to the menu item in which the change has been
made. For example, if you change and save parameter values for the
VLANs to support
the VLAN Menu screen, and also next to the the
the Main menu, as shown in figure 4-6:
Asterisk indicates
a configuration
change that
requires a reboot
in order to take
effect.
Reminder to
reboot the switch
to activate
configuration

changes.

Figure 5-6. Indication of a Configuration Change Requiring a Reboot
Using the Web Browser Interface To Implement
Configuration Changes
You can use the web browser interface to simultaneously save and implement
a subset of switch configuration changes without having to reboot the switch.
That is, when you save a configuration change (in most cases, by clicking on
[Apply Changes]
config file and the startup-config file.
Using the Menu and Web Browser Interfaces To Implement Configuration Changes
parameter
.
parameter, an asterisk appears next to the
or , you simultaneously change both the running-
[Apply Settings]
Switch Memory and Configuration
.)
1. VLAN Support
VLAN Support
Switch Configuration . . .
Maximum
Maximum
entry in
entry in
5-11