Cli Access For Mac Address Views And Searches - HP procurve series 4100gl Management And Configuration Manual

Figure B-10. Listing MAC Addresses for a Specific Port
2. Use the Space bar to select the port you want to list or search for MAC
addresses, then press
Determining Whether a Specific Device Is Connected to the Selected
Port. Proceeding from step 2, above:
[S]
1. Press (for Search), to display the following prompt:
Enter MAC address: _
2. Type the MAC address you want to locate and press
highlighted if found. If the switch does not find the address, it leaves the
MAC address listing empty.
[P]
(for Prev page) to return to the previous per-port listing.
3. Press

CLI Access for MAC Address Views and Searches

show mac-address
Syntax:
[vlan <vlan-id>]
[ethernet]<port-list>]
[<mac-addr>]
To List All Learned MAC Addresses on the Switch, with The Port
Number on Which Each MAC Address Was Learned.
HPswitch> show mac-address
To List All Learned MAC Addresses on one or more ports, with Their
Monitoring and Analyzing Switch Operation
Prompt for Selecting
the Port To Search
to list the MAC addresses detected on that port.
[Enter]
Status and Counters Data
. The address is
[Enter]
B-15