Cli Administrative And Troubleshooting Commands - HP procurve series 4100gl Management And Configuration Manual

N o t e
Listing Switch Configuration and Operation Details for Help in Troubleshooting

CLI Administrative and Troubleshooting Commands

These commands provide information or perform actions that you may find
helpful in troubleshooting operating problems with the switch.
For more on the CLI, refer to chapter 3, "Using the Command Line Reference
(CLI).
show version
Syntax:
show boot-history
show history
[no] page
setup
repeat
kill
Troubleshooting
Shows the software version
currently running on the switch,
and the flash image from which the
switch booted (primary or
secondary).
Displays the switch shutdown
history.
Displays the current command
history.
Toggles the paging mode for
display commands between
continuous listing and per-page
listing.
Displays the Switch Setup screen
from the menu interface
Repeatedly executes the previous
command until a key is pressed.
Terminates all other active
sessions.
C-33