Timep: Viewing, Selecting, And Configuring - HP procurve series 4100gl Management And Configuration Manual

Figure 8-8. Example of Disabling Time Synchronization by Disabling the SNTP Mode
TimeP Feature
view the Timep time synchronization configuration
select Timep as the time syncronization method
disable time synchronization
enable the Timep mode
DHCP
manual
none/disabled
change the SNTP poll interval
Disabling the SNTP Mode. If you want to prevent SNTP from being used
even if selected by
timesync
eter), configure the SNTP mode as disabled.
Syntax: no sntp Disables SNTP by changing the SNTP mode
configuration to
For example, if the switch is running SNTP in Unicast mode with an SNTP
server at 10.28.227.141 and a server version of 3 (the default),
the SNTP configuration as shown below, and disables time synchronization
on the switch.
TimeP: Viewing, Selecting, and
Configuring

TimeP: Viewing, Selecting, and Configuring

(or the Menu interface's
.
Disabled
Even though the Time Sync Mode is set to Sntp,
time synchronization is disabled because no
sntp has disabled the SNTP Mode parameter.
Default
n/a
TIMEP
timep
Disabled
—
—
—
720 minutes
Time Protocols
param-
Time Sync Method
changes
no sntp
Menu CLI
page 8-14 page 8-16
page 8-13 pages 8-17
ff.
page 8-15 page 8-19
page 8-15 page 8-17
page 8-15 page 8-18
page 8-15 page 8-20
page 8-16 page 8-19
Web
—
—
—
—
—
—
—
—
8-13