HP procurve series 4100gl Management And Configuration Manual page 42

Using the Menu Interface
Main Menu Features
2-8
Command Line (CLI): Selects the Command Line Interface at the same
I
level (Manager or Operator) that you are accessing in the Menu interface.
(See chapter 3, "Using the Command Line Interface (CLI)".)
I Reboot Switch: Performs a "warm" reboot of the switch, which clears
most temporary error conditions, resets the network activity counters to
zero, and resets the system up-time to zero. A reboot is required to activate
a change in the VLAN Support parameter. (See "Rebooting from the Menu
Interface" on page 5-10.)
Download OS: Enables you to download a new software version to the
I
switch. (See Appendix A, "File Transfers".)
Run Setup: Displays the Switch Setup screen for quickly configuring
I
basic switch parameters such as IP addressing, default gateway, logon
default interface, spanning tree, and others. (See the Installation and
Getting Started guide shipped with your switch.)
I Stacking: Enables you to use a single IP address and standard network
cabling to manage a group of up to 16 switches in the same subnet
(broadcast domain). See Chapter 14, "HP Procurve Stack Management".
Logout: Closes the Menu interface and console session, and disconnects
I
Telnet access to the switch. (See "How to End a Menu Session and Exit
from the Console" on page 2-5.)