Notices; Copyright Notice - AMX DXF-TX-MMD Instruction Manual

Notices

Copyright Notice

©
AMX 2014 (Rev B), all rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the
prior written permission of AMX. Copyright protection claimed extends to AMX hardware and software and includes all
forms and matters copyrightable material and information now allowed by statutory or judicial law or herein after
granted, including without limitation, material generated from the software programs which are displayed on the screen
such as icons, screen display looks, etc. Reproduction or disassembly of embodied computer programs or algorithms is
expressly prohibited.
No patent liability is assumed with respect to the use of information contained herein.
Liability Notice
No patent liability is assumed with respect to the use of information contained herein.
While every precaution has been taken in the preparation of this publication, AMX assumes no responsibility for error or
omissions. No liability is assumed for damages resulting from the use of the information contained herein.
Further, this publication and features described herein are subject to change without notice.
US FCC Notice
The United States Federal Communications Commission (in 47 e-CFR 15.105) has specified that the following notice be
brought to the attention of the users of this product.
"Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense."
Lithium Batteries Notice
Switzerland requires the following notice for products equipped with lithium batteries. This notice is not applicable for
all AMX equipment.
Upon shipment of the products to Switzerland, the requirements of the most up-to-date Swiss Ordinance Annex 2.15 of
SR 814.81 will be met including provision of the necessary markings, documents, and annual reports relative to the
disposal of the batteries to the Swiss Authorities.
Trademark Notices
®
AMX , Enova
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
®
UL and the UL logo are trademarks of UL LLC.
™
3M , Desco
®
Ethernet
ENERGY STAR
Agency.
Apache™ is a trademark of the Apache Software Foundation. Used with permission. No endorsement by the Apache
Software Foundation is implied by the use of these marks.
Other products mentioned herein may be the trademarks of their respective owners.
Instruction Manual – DXLink Fiber Transmitters and Receivers
® ® ®
, AutoPatch , NetLinx
® ®
, Richmond Technology , and Plastic Systems
is a registered trademark of the Xerox Corporation.
®
is a registered trademark of the U.S. Department of Energy and the U.S. Environmental Protection
®
, SmartScale , and InstaGate Pro
®
are registered trademarks.
®
are trademarks of AMX.
Notices
9