Compatibility With Dxlink Fiber Boards; Features - Dxlink Fiber Transmitters And Receivers - AMX DXF-TX-MMD Instruction Manual

Compatibility with DXLink Fiber Boards

DXLink Fiber TXs and RXs work in conjunction with each other as long as the constraints of multimode to multimode
and single mode to single mode are maintained (see "DXLink Fiber Hardware Compatibility" section on page 13).
DXLink Fiber TXs and RXs work in conjunction with the Enova DGX DXLink Fiber Input and Output Boards in the
following table as long as the constraints of multimode to multimode and single mode to single mode are maintained.
DXLink Fiber Boards
Part #
FG1058-622
FG1058-632
FG1058-620
FG1058-630
FG1058-623
FG1058-633
FG1058-621
FG1058-631
Features – DXLink Fiber Transmitters and Receivers














Instruction Manual – DXLink Fiber Transmitters and Receivers
Model Name
Enova DGX DXLink Multimode Fiber
Input Board, Duplex
Enova DGX DXLink Multimode Fiber
Output Board, Duplex
Enova DGX DXLink Single Mode Fiber
Input Board, Duplex
Enova DGX DXLink Single Mode Fiber
Output Board, Duplex
Enova DGX DXLink Multimode Fiber
Input Board, Simplex
Enova DGX DXLink Multimode Fiber
Output Board, Simplex
Enova DGX DXLink Single Mode Fiber
Input Board, Simplex
Enova DGX DXLink Single Mode Fiber
Output Board, Simplex
Optical transport rate of 10 Gbps.
®
Incorporates HDMI technology.
HDCP 1.4 compatible.
Supports computer video up to 1920x1200, HDTV up to 1080p, as well as 3D support (3D and Deep Color).
Supports HDMI pass through with embedded digital audio and single link DVI (via DVI-to-HDMI cable).
A local HDMI output connector on the front of the Transmitters for sending the video signal from the source
directly to a local destination device.
DXLink Fiber TX units support analog video: composite, Y/C, Y/Pb/Pr, RGB, RGBS, or RGBHV.
DXLink Fiber multimode units transport video signals over distances up to 984 feet (300 m).
DXLink Fiber single mode units transport video signals over distances up to 6.21 miles (10 km).
Interruption free content when used in conjunction with a switcher; AMX's exclusive InstaGate Pro
Technology allows audio and video to be switched quickly and easily to every connected display without the
difficulties typically associated with HDCP.
AutoDetect on the Transmitters and SmartScale
device's supported resolutions and signal type parameters, allowing switching out source and destination
devices without manual setup. Also included is the ability to control detailed timing parameters for
customized video output formats. (SmartScale is the ability to configure the scaling output by automatically
selecting destination defined resolutions.)
Supports HDMI embedded digital audio and analog stereo audio.
Fiber optic cable (for fiber cable specifications, see page 32).
Field serviceable SFP+ fiber optic transceivers, easier to remove and replace an individual transceiver rather
than a TX or RX unit or an Enova DGX DXLink Fiber Board.
Model Number, Description
DGX-I-DXF-MMD,
ENOVA DGX DXLINK MM FIBER INPUT BOARD, DUPLEX
DGX-O-DXF-MMD,
ENOVA DGX DXLINK MM FIBER OUTPUT BOARD, DUPLEX
DGX-I-DXF-SMD,
ENOVA DGX DXLINK SM FIBER INPUT BOARD, DUPLEX
DGX-O-DXF-SMD,
ENOVA DGX DXLINK SM FIBER OUTPUT BOARD, DUPLEX
DGX-I-DXF-MMS,
ENOVA DGX DXLINK MM FIBER INPUT BOARD, SIMPLEX
DGX-O-DXF-MMS,
ENOVA DGX DXLINK MM FIBER OUTPUT BOARD, SIMPLEX
DGX-I-DXF-SMS,
ENOVA DGX DXLINK SM FIBER INPUT BOARD, SIMPLEX
DGX-O-DXF-SMS,
ENOVA DGX DXLINK SM FIBER OUTPUT BOARD, SIMPLEX
®
on the Receivers work to automatically recognize any
Overview DXLink Fiber
®
17