AMX DXF-TX-MMD Instruction Manual page 78

In NetLinx Studio's OnLine Tree, the DXLink Fiber Transmitters and Receivers each display their ports.
FIG. 31
NetLinx Studio OnLine Tree - Ports 1-8 on DXLink Fiber Transmitter and Ports 1-7 on Receiver
Note: For additional information on using NetLinx Studio, refer to the "WebConsole & Programming Guide –
NX-Series Controllers" (available at www.amx.com).
Note: All command text is based on a Unicode index.
Tip: Occasionally new firmware versions affect SEND_COMMANDs. If a command does not produce the
expected results, we suggest checking the product's current firmware version against the information in the
"Firmware Version" table on page 102.
Instruction Manual – DXLink Fiber Transmitters and Receivers
Ports 1-8 on DXLink Fiber Transmitter
(device number 01000)
Ports 1-7 on DXLink Fiber Receiver
(device number 02000)
NetLinx Programming – DXLink Fiber TXs/RXs
DXLink Fiber Transmitter
Port 1 - Serial ICSP (COM)
Port 2 - Not used
Port 3 - IR Output
Port 4 - IR Input
Port 5 - USB (HID) input and output
Port 6 - Digital Video/Audio Output
Port 7 - Digital Video/Audio Input
Port 8 - Analog Video Input
DXLink Fiber Receiver
Port 1 - Serial ICSP (COM)
Port 2 - Not used
Port 3 - IR Output
Port 4 - IR Input
Port 5 - USB (HID) host data
Port 6 - Digital Video/Audio Output
Port 7 - Digital Video/Audio Input
78