AMX DXF-TX-MMD Instruction Manual page 33

General Specifications (continued)
Single Mode Optical Budget
Single Mode Optical Transceiver
Mean Output Power
Multimode Optical Budget
Multimode Optical Transceiver
Mean Output Power
Noise Level
Airflow
Approvals
Other AMX Equipment
AMX Products Compatible with
DXLink Fiber Transmitters*
AMX Products Compatible with
DXLink Fiber Receivers*
Included Accessories
Compatible / Optional Equipment
* Connectivity between products requires matching transceiver types, MM to MM and SM to SM.
Note: Duplex boards/units support bidirectional control over fiber. Simplex boards/units do not support EDID
transfer and control transport (such as Ethernet, USB, IR, and Serial Control) over fiber; although when used
as part of a complete Enova DGX solution, control can be provided if a supplemental independent network
connection is used. For details, see the "Instruction Manual - Enova DGX 8/16/32/64 Digital Media Switchers."
NetLinx and Control Specifications
ICS LAN / Ethernet Port
Serial Port
IR Control Port
Advanced Configuration Interface
ID Pushbutton
AMX reserves the right to modify its products and their specifications without notice.
Instruction Manual – DXLink Fiber Transmitters and Receivers
• 7.4 dB (typical) between DXLink Fiber Transceivers
• Optical Modulation Amplitude (OMA): -5.2 dBm (min.)
• Optical Modulation Amplitude (OMA) sensitivity: -12.6 dBm (typical)
-8.2 dBm to 0.5 dBm (average power)
• 6.8 dB (typical) between DXLink Fiber Transceivers
• Optical Modulation Amplitude (OMA): -4.3 dBm (min.)
• Optical Modulation Amplitude (OMA) sensitivity: -11.1 dBm (typical),
-1 dBm (average power)
0 dBA @1m (typical), 45.3 dBA @ 1m (max)
Convection (openings on top of case, typical); forced air (out of front plate, when
fan is active).
UL 60950-1, CSA 60950-1, IEC 60950-1, CE EN 60950-1, CE EN 55022
Class A, CE EN 55024, FCC CFR Title 47 Part 15 Subpart B Class A, ICES-003
Class A, RoHS, WEEE
Enova DGX Digital Media Switchers
Enova DGX Digital Media Switchers
• Desktop power supply (ENERGY STAR
Caution: Only the provided desktop power supply should be used, and it
must not be altered in any way.
• CC-NIRC, NetLinx Emitter Cable (FG10-000-11)
• IR03, External IR Receiver Module (FG-IR03)
• CC-MINIUSB, Mini USB to PC cable adapter (FG5967-20): use with DXLink
Fiber RX only – for connecting a keyboard/mouse device
• CC-USB, USB programming cable (FG10-5965): use with DXLink Fiber TX
only – for connecting to a PC
• TCP/IP port (ICS LAN 10/100)
• RJ-45 connector
• Bidirectional RS-232
• Standard NetLinx baud rate 1200 to 115k
• Parity support: Odd/Even/None
• 3.5 mm pluggable Phoenix terminal block
• Port for use with IR03 External IR Receiver (optional accessory FG-IR03)
• Port for use with CC-NIRC NetLinx Emitter (optional accessory FG10-000-11)
USB mini-B connector (Program port)
• Toggle between DHCP and static IP addressing
• Places system in NetLinx Device ID assignment mode
• Reset the factory default settings
• Restore the factory firmware image
DXLink Fiber Specifications
qualified): 1 per unit
®
33