AMX DXF-TX-MMD Instruction Manual page 122

Note: The following procedure was completed on Windows 7 Professional (other versions may vary slightly).
To set a PC to Static IP Mode:
1.
From the Start menu on the desktop taskbar, select Control Panel / Network and Sharing Center.
2.
Click "Change adapter settings" (top left).
3.
Right-click on Local Area Connection and select Properties.
The Local Area Connection Properties dialog box opens.
4.
From the list of "This connection uses the following items" (see above), highlight Internet Protocol Version 4
(TCP/IPv4) and click Properties.
The Internet Protocol Version 4 (TCP/IPv4) Properties dialog box opens.
5.
Select "Use the following IP address" and enter 192.168.1.50 (or the IP range of the Enova DGX).
Instruction Manual – DXLink Fiber Transmitters and Receivers
Appendix C – Virtual NetLinx Master
Internet Protocol Properties dialog box
122