AMX DXF-TX-MMD Instruction Manual page 50

ICS LAN 10/100 LEDs
Instruction Manual – DXLink Fiber Transmitters and Receivers
Twisted Pair Cable for ICS LAN 10/100 Connection
Cable Pinout
Either T568A or T568B pinout specification for termination of twisted pair cable can be used for ICS LAN 10/100.
FIG. 18 Twisted pair cable pinouts for Ethernet connectors
ICS LAN 10/100 Connector LEDs
The following information applies to the LEDs on the ICS LAN 10/100 (RJ-45) connector on the units.
LEDs on unit
FIG. 19 ICS LAN 10/100 connector LEDs

Link/Activity (L/A) Green LED:
On – Link status is active (when the Ethernet cable is connected and terminated correctly)

Off – Link status is not active


Speed Status (SPD) Yellow LED:
On – Speed status is 100 Mbps

Off – Speed status is 10 Mbps

Green LED
Yellow LED
Installation and Setup
50