Creating A Virtual Master - AMX DXF-TX-MMD Instruction Manual

6.
Press the Tab key on your keyboard to auto-fill the Subnet mask field.
7.
Click OK and click Close.
Important: When finished using the PC as a Virtual Master, change the setting in the dialog box shown in
Step 4 back to "Obtain an IP address automatically."

Creating a Virtual Master

To create a Virtual Master in NetLinx Studio:
1.
Open NetLinx Studio.
2.
From the Settings menu, select Master Communication Settings.
3.
Click Communication Settings on the right.
The Communication Settings dialog box opens.
Instruction Manual – DXLink Fiber Transmitters and Receivers
Appendix C – Virtual NetLinx Master
Click to open the
Communication Settings
dialog box
123