AMX DXF-TX-MMD Instruction Manual page 31

Quick Reference Table 3 – Modes for Handling Video and Video Processing
Mode
Scaling Mode
Instruction Manual – DXLink Fiber Transmitters and Receivers
Description
Scaling Mode refers to how the system alters or maintains a source device's resolution as it is
passed along to the destination device. The Scaling Mode can be set on the DXLink Fiber RX
with the Scaling button (see page 61), or with SEND_COMMANDs (see page 79), or through
DGX Configuration Software when scaling is being done via an Enova DXLink Fiber Output
Board.
Auto Mode (Default):
®
• Auto Mode (SmartScale ) allows the destination device to choose the resolution it needs.
Manual Mode:
• Manual Mode allows the user to configure the resolution the video will display through a
destination device.
Bypass Mode:
• Bypass Mode allows the video signal to display over the destination device without altering
the signal's resolution.
Overview DXLink Fiber
31