AMX DXF-TX-MMD Instruction Manual page 34

USB (HID) Keyboard and Mouse Specifications
USB (HID) TX
USB (HID) RX
Note: A list of HID devices which have been tested and found to be working well with the latest firmware is
available (see "DXLink - HID supported Devices" on the DXLink Fiber Receiver's product page on the web).
HDMI Specifications
Compatible Formats
Signal Type Support
Video Data Rate (max.)
Video Pixel Clock (max.)
Progressive Resolution Support
Interlaced Resolution Support
2K Resolution Support^^^
Deep Color Support
Color Space Support
3D Format Support
Audio Format Support
Audio Resolution
Audio Sample Rate
Local Audio Support
HDCP Support
CEC support
^ Only supported when the DXLink Fiber HDMI RX scaler is in Bypass Mode using CEA-861 formats and the resolution is
1080p60 or less.
^^ Input signal support for YCbCr 4:4:4 and 4:2:2; output color-space is converted to RGB 4:4:4.
^^^ The Scaler on corresponding output board must be set to Bypass Mode.
* Dolby Digital and DTS support up to 48 kHz, 5.1 channels.
Note: Interlaced and progressive video are supported into the Transmitter; progressive is only supported out
of the Receiver unless in non-scaling Bypass Mode.
AMX reserves the right to modify its products and their specifications without notice.
Instruction Manual – DXLink Fiber Transmitters and Receivers
• (1) USB mini-A/B connector ("Host")
• Connect a DXLink Fiber TX to a PC and emulate keyboard and mouse
commands from a DXLink Fiber Receiver or a DXLink Twisted Pair Receiver
• (1) USB mini-A/B connector ("Device")
• Connect a keyboard and mouse and send commands to a PC connected to a
DXLink Fiber Transmitter or a DXLink Twisted Pair Transmitter
HDMI, HDCP, DVI (DVI requires conversion cable)
• HDMI
• DVI-D (Single Link via a DVI-to-HDMI cable adapter)
• DisplayPort++ (input only with HDMI or DVI cable adapter)
4.95 Gbps / 5.568 Gbps^
165 MHz / 185.625 MHz^
480p up to 1920x1200 @ 60 Hz (supported resolutions are listed in the "Supported
Input Resolutions" appendix; see page 130)
480i, 576i, 1080i (supported resolutions are listed in the "Supported Input
Resolutions" appendix; see page 130)
2048x1024 @ 47Hz, 2048x1080 @ 60Hz, 2048x1152 @ 60Hz,
2048x1536 @ 24Hz
24 bit, 30 bit^
RGB 4:4:4
YCbCr^^ 4:4:4 and 4:2:2
Yes^^^ (HDMI Primary Formats)
• Frame Packing 1080p up to 24 Hz
• Frame Packing 720p up to 50/60 Hz
• Frame Packing 1080i up to 50/60 Hz
• Top-Bottom 1080p up to 24 Hz
• Top-Bottom 720p up to 50/60 Hz
• Side-by-Side Half 1080i up to 50/60 Hz
Dolby TrueHD, Dolby Digital*, DTS-HD Master Audio, DTS*, 2 CH L-PCM,
6 CH L-PCM, 8 CH L-PCM
16 bit to 24 bit
32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
TX insertion, RX extraction
Yes
• Supports AMX HDCP InstaGate Pro
• DXLink Fiber products have HDCP key support for up to
16 sinks per output, independent of the source device.
CEC is not currently supported
DXLink Fiber Specifications
®
Technology.
34