AMX DXF-TX-MMD Instruction Manual page 124

4.
Under Transport Connection Option, select Virtual NetLinx Master.
5.
Under Virtual NetLinx Master Options:
a.
Optional – Change the Master System Number (default = 1; range = 1 to 65535).
b.
Select the desired IP Address in the Available Connections list (this will be the static IP address that the PC was
set to in the previous instructions).
6.
Click Select.
7.
Click OK to save the changes and close the dialog box.
The Virtual Master displays in the NetLinx Studio's OnLine Tree.
Important: When transferring files via a Virtual Master, a direct connection must be made between the
DXLink Fiber unit and the PC via the unit's ICS LAN 10/100 port.
Instruction Manual – DXLink Fiber Transmitters and Receivers
Appendix C – Virtual NetLinx Master
Select Virtual NetLinx Master
Change Master System Number (optional)
Select IP Address (PC's static IP address)
124