AMX DXF-TX-MMD Instruction Manual page 36

Analog Video Specifications
DXLink Fiber TX
Compatible Formats
Progressive Resolution Support
Interlaced Resolution Support*
Auto-Adjust Input
RGB Input Signal Level Range
RGB Input Impedance
HV Sync Input Signal Level Range
HV Sync Input Impedance
Digital Processing
Y/Pb/Pr Input Signal Level Range
Y/Pb/Pr Input Impedance
Y/C (S-Video) Input Signal Level Range
Y/C (S-Video) Input Impedance
C (Composite) Input Signal Level Range
C (Composite) Input Impedance
Input Connector
* Interlaced video is supported into the Transmitter; progressive is only supported out of the Receiver unless in Scaler
Bypass Mode.
AMX reserves the right to modify its products and their specifications without notice.
Instruction Manual – DXLink Fiber Transmitters and Receivers
• RGBHV, RGBS, RGsB
• Y/Pb/Pr (HDTV)
• Y/C (S-Video), C (Composite)
480p up to 1920x1200 @ 60 Hz (supported resolutions are shown in the
"Supported Input Resolutions" appendix; see page 130)
480i, 576i, 1080i (supported resolutions are shown in the "Supported Input
Resolutions" appendix; see page 130)
Supported
1 Vpp nominal
75 Ω
2 to 5 Vpp
2.5 pF typical, 10 pF max.
24 bit, 165 MHz
• 1.0 Vpp for Y
• 700 mVpp for Pb, Pr
75 Ω
• 1.0 Vpp for Y
• 1.0 Vpp for C
75 Ω
1.0 Vpp
75 Ω
HD-15 (breakout cable required for non-RGB formats)
DXLink Fiber Specifications
36