Rear Fan - HP 8200 Elite Series Maintenance And Service Manual

Rear Fan

Description
Rear fan
The rear fan is secured to the rear right corner of the chassis. You must remove the system board
before you can remove the rear fan.
1. Prepare the computer for disassembly
2. Remove the computer access panel
3. Remove the optical drive
4. Remove the front fan
5. Remove the hard drive
6. Remove the optical drive rail
7. Remove the heat sink
8. Remove the system board
9. From the outside of the chassis, remove the four Phillips screws that secure the fan to the
chassis.
Figure 9-32
236 Chapter 9 Removal and Replacement Procedures – Ultra-Slim Desktop (USDT) Chassis
(Removing the Optical Drive on page
(Front Fan on page
(Hard Drive on page
(Optical Drive Rail on page
(Heat sink on page
(System Board on page
Removing the rear fan screws
(Preparation for Disassembly on page
(Access Panel on page
215).
219).
223).
227).
234).
Spare part number
605155-001
206).
207).
216).