System Board Connections - HP 8200 Elite Series Maintenance And Service Manual

11. Replace the computer access panel.
12. If the computer was on a stand, replace the stand.
13. Reconnect the power cord and turn on the computer.
14. Lock any security devices that were disengaged when the access panel was removed.
15. Reconfigure the computer, if necessary.

System Board Connections

Refer to the following illustration and table to identify the system board connectors for your model.
Figure 8-11
Table 8-1 8200 Elite Series system board connections
No. System Board Connector
1 DIMM4 (Channel A)
2 DIMM3 (Channel A)
3 DIMM2 (Channel B)
4 DIMM1 (Channel B)
5 Power
6 Power
7 SATA 3.0
8 SATA 3.0
9 SATA 2.0
10 eSATA
11 Parallel Port
12 Serial Port
176 Chapter 8 Removal and Replacement Procedures – Small Form Factor (SFF) Chassis
8200 Elite Series system board connections
System Board Label
DIMM4
DIMM3
DIMM2
DIMM1
SATAPWR0
SATAPWR1
SATA0
SATA1
SATA2
ESATA
PAR
COMB
Color Component
white Memory Module
black Memory Module
white Memory Module
black Memory Module
black SATA Optical Drives
black SATA Hard Drives
dark blue 1st Hard Drive
light blue 2nd Hard Drive, or 2nd Optical Drive
if an ESATA Adapter Cable exists
white 1st Optical Drive
black eSATA Adapter Cable, or 2nd
Optical Drive
black Parallel Port
black Serial Port