9.
Reposition the bezel blanks within the subpanel in the proper orientation for the minitower
configuration.
10.
Reposition the subpanel (rotate it 90º) with the logo at the bottom, then snap it back into the
bezel.
Figure 6-55
11.
Replace the front bezel and computer access panel.
12.
Reconnect the power cord and turn on the computer.
13.
Lock any security devices that were disengaged when the computer access panel was removed.
124 Chapter 6 Removal and Replacement Procedures – Convertible Minitower (CMT) Chassis
Changing from a Desktop to a Minitower Configuration