HP 8200 Elite Series Maintenance And Service Manual page 96
Hide thumbs
Also See for 8200 Elite Series:
- Quickspecs (77 pages) ,
- Hardware reference manual (31 pages) ,
- Product end-of-life disassembly instructions (12 pages)
Table of Contents
Advertisement
4.
Press straight down on the two green thumb tabs inside the chassis (1) and rotate the expansion
card retention latch up (2).
Figure 6-8
5.
Before installing an expansion card, remove the expansion slot cover or the existing expansion
card.
NOTE:
attached to the expansion card.
a.
If you are installing an expansion card in a vacant socket, remove the appropriate
expansion slot cover on the back of the chassis. Lift the expansion slot cover from the
expansion slot.
Figure 6-9
84
Chapter 6 Removal and Replacement Procedures – Convertible Minitower (CMT) Chassis
Opening the Expansion Slot Retainer
Before removing an installed expansion card, disconnect any cables that may be
Removing an Expansion Slot Cover
- Quick Links:
- Computer System Components
Hide quick links:
Advertisement
Table of Contents
