HP 8200 Elite Series Maintenance And Service Manual page 23

Table 2-4 Computer Setup—Security (continued)
USB Security Allows you to set Enabled/Disabled (default is Enabled) for:
●
●
●
Slot Security Allows you to disable any PCI or PCI Express slot. Default is enabled.
Network Boot Enables/disables the computer's ability to boot from an operating system installed on a network
server. (Feature available on NIC models only; the network controller must be either a PCI
expansion card or embedded on the system board.) Default is enabled.
System IDs Allows you to set:
●
●
●
●
Front USB Ports
◦
USB Port 1
◦
USB Port 2
◦
USB Port 3
◦
USB Port 4
Rear USB Ports
◦
USB Port 1
◦
USB Port 2
◦
USB Port 3
◦
USB Port 4
◦
USB Port 5
◦
USB Port 6
Accessory USB Ports
◦
USB Port 1
◦
USB Port 2 (some models)
◦
USB Port 3 (some models)
◦
USB Port 4 (some models)
Asset tag (18-byte identifier), a property identification number assigned by the company to
the computer.
Ownership tag (80-byte identifier) displayed during POST.
Chassis serial number or Universal Unique Identifier (UUID) number. The UUID can only be
updated if the current chassis serial number is invalid. (These ID numbers are normally set in
the factory and are used to uniquely identify the system.)
Keyboard locale setting for System ID entry.
Computer Setup (F10) Utilities 11