System Board - HP 8200 Elite Series Maintenance And Service Manual

System Board

Description
System board, includes Trusted Platform Module (TPM)
System board, does not include Trusted Platform Module (TPM)
Front I/O panel
CAUTION:
1. Prepare the computer for disassembly
2. Remove the computer access panel
3. Remove the memory modules
4. Remove the front fan
5. Remove the optical drive
6. Remove the hard drive
7. Remove the optical drive rail
8. Remove the heat sink
9. Disconnect the rear fan cable from the system board.
10. Disconnect any remaining cables connected to the system board, noting their location for
reinstallation.
11. Remove the front I/O panel:
a. Remove the screw from the right side of the panel that secures it to the front of the chassis.
Figure 9-29
234 Chapter 9 Removal and Replacement Procedures – Ultra-Slim Desktop (USDT) Chassis
Be very careful when removing or replacing the system board to prevent damaging it.
(Memory on page
(Front Fan on page
(Removing the Optical Drive on page
(Hard Drive on page
(Optical Drive Rail on page
(Heat sink on page
I/O panel screw
(Preparation for Disassembly on page
(Access Panel on page
211).
215).
219).
223).
227).
Spare part number
611836-001
649743-001
587458-001
206).
207).
216).