Speaker - HP 8200 Elite Series Maintenance And Service Manual

Speaker

Description
Speaker
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the front fan assembly
4. Disconnect the speaker wire from the system board connector labeled SPKR.
5. From the inside of the chassis, remove the two silver Torx screws (1) that secure the speaker to
the chassis.
6. Rotate the top of the speaker downward (2), and then remove it from the chassis.
Figure 7-31
To replace the speaker, reverse the removal procedures.
158 Chapter 7 Removal and Replacement Procedures – Microtower (MT) Chassis
(Computer Access Panel on page
(Front Fan Assembly on page
Removing the speaker
(Preparation for Disassembly on page
126).
Spare part number
645330-001
73).
149).