Radyne DMD2050 Operation Manual page 79

User Interfaces
Masking alarms may cause undesirable modem performance.
CURRENT ALARMS (menu)
TX MAJOR (menu)
FPGA CFG
DSP CFG
SCT CLOCK PLL
SYM CLOCK PLL
LB SYNTH PLL
IF SYNTH PLL
ETHERNET WAN
FORCED ALARM
TX MINOR (menu)
TERR CLK ACT
TERR DATA ACT
4-22
Status Edit Table
{Pass/Fail, Unmasked/Masked}
Indicates a transmit FPGA configuration failure.
{Pass/Fail, Unmasked/Masked}
Indicates a transmit DSP configuration failure.
{Pass/Fail, Unmasked/Masked}
Indicates that the Tx SCT Clock PLL is not locked. This
alarm will flash on during certain modem parameter
changes. A solid indication points toward a configuration
failure within the modem.
{Pass/Fail, Unmasked/Masked}
Indicates that the Tx Symbol Clock PLL is not locked.
This alarm will flash on during certain modem parameter
changes. A solid indication points toward a problem with
the incoming clock to the modem (SCTE).
{Pass/Fail, Unmasked/Masked}
Indicates that the Tx L-Band Synthesizer is not locked.
This alarm will flash on during certain modem parameter
changes. A solid indication points toward a configuration
problem within the modem.
{Pass/Fail, Unmasked/Masked}
Indicates that the Tx IF Synthesizer is not locked. This
alarm will flash on during certain modem parameter
changes. A solid indication points toward a configuration
problem within the modem.
{Pass/Fail/Unmasked/Masked}
Indicates that the interface card is faulted and will not
pass data (displays only when the Ethernet Card is
installed and the Ethernet Interface is selected).
{DISABLED, ENABLED}
Allows the user to disable or enabale forcing of the Tx
summary alarm. It does not affect Tx output.
{Pass/Fail, Unmasked/Masked}
Indicates no Terrestrial Clock activity.
{Pass/Fail, Unmasked/Masked}
Indicates no Tx Data activity.
DMD2050 Universal Satellite Modem
TM110 - Rev. 1.3