Radyne DMD2050 Operation Manual page 90

DMD2050 Universal Satellite Modem
TRAP VERSION
AUTHORIZATION
RD COMMUNITY
RDWR COMMUNITY
FTP (menu)
USER ID
PASSWORD
WEB
CONFIRMATION
USER 1
ACCESS GROUP
TM110 – Rev. 1.3
{V1, V2}
This controls the type of message format used when a
message trap is generated by the equipment and bound
for a SNMP Host. Messages will only be sent if the unit
has been authorized to do so.
{TRAPS OFF, TRAPS ON}
This controls the type of message format used when a
message trap is generated by the equipment and bound
for a SNMP host. Messages will only be sent if the unit
has been authorized to do so.
{16 characters of name}
This menu is only displayed when SNMP VERSION is
set to V1 & V2.
This is the community that a host must be acting within
when an OID variable is requested by a V1/V2 SNMP
message.
{16 characters of name}
This menu is only displayed when SNMP VERSION is
set to V1 & V2.
This is the community that a host must be acting within
when an OID variable is being changed by a V1/V2
SNMP message.
Allows the user to enter the user identification for access
to an FTP session.
Allows the user to enter the password for access to an
FTP session.
{ENABLE, DISABLE}
{NO GROUP, GUEST, OPER, ADMIN}
Access rights represent the following:
No Group: Denies Access
Guest: Users are able to navigate most of the site, and
view modem parameter settings.
Oper: Users can monitor and and control parameter
settings, and change
passwords.
User Interfaces
their own authentication
4-33