Unpacking; Removal And Assembly - Radyne DMD2050 Operation Manual

Installation
The DMD2050 contains a Lithium Battery.
exists if the battery is incorrectly replaced. Replace only with the same
or equivalent type recommended by the manufacturer. Dispose of used
batteries in accordance with local and national regulations.

2.1 Unpacking

The DMD2050 Universal Satellite Modem was carefully packaged to avoid damage and should
arrive complete with the following items for proper installation:
•
DMD2050 Modem Unit
• Power Cord, with applicable AC Connector
•
Installation and Operation Manual

2.2 Removal and Assembly

The DMD2050 Modem Unit is shipped fully assembled. It does not require removal of the covers
for any purpose in installation.
Always ensure that power is removed from the DMD2050 before
removing or installing any optional modules. Failure to do so may cause
damage to the equipment.
Carefully unpack the unit and ensure that all of the above items are in the carton. If the available
AC mains power at the installation site requires a different cordset from the one included in the
package, then a suitable and approved cordset (for the country where the equipment is to be
installed) will be required before proceeding with the installation.
Should the Power Cable/AC Connector be of the wrong type for the installation, either the cable
or the power connector end should be replaced. The power supply itself is designed for universal
AC application. See specifications for appropriate voltages and currents.
2-2
DMD2050 Universal Satellite Modem
DANGER OF EXPLOSION
TM110 - Rev. 1.3