Radyne DMD2050 Operation Manual page 205

Appendix F
The Computer TCP/IP must be properly configured in order to obtain connectivity. The following
set-up procedure can be used as a guide to aide in this setup. The following instructions apply
only to Windows 2000 or XP Classic.
1. Click on the Start Button. Select Settings and click on the Control Panel Icon.
Double click the Network Connections Icon.
2. Select the Local Area Connection icon for the applicable Ethernet adapter. Usually it
is the first Local Area Connection listed. Double click the Local Area Connection.
Click on the Properties icon.
3. Make sure that the box next to the Internet Protocol (TCP/IP) is checked. Highlight
Interconnect Protocol (TCP/IP) and click on the Properties button.
F-4
Local Area Connection Status Box
DMD2050 Universal Satellite Modem
TM110 – Rev. 1.3