Aupc Menu Options And Parameters; Monitor Menu Options And Parameters - Radyne DMD2050 Operation Manual

DMD2050 Universal Satellite Modem
ES INTERFACE
ES BITS/CHAR
RX ES ENHANCED (menu)
RX ASYNC MODE
ES INTERFACE
ES BAUD RATE
ES BITS/CHAR

4.3.5 AUPC Menu Options and Parameters

AUPC Menus are only available when the Modulator is in 'Closed Net'
Network Spec and Framing is 'EFAUPC 1/15'.

4.3.6 Monitor Menu Options and Parameters

EVENTS
ERASE EVENTS.. PRESS CLEAR
INPUT LVL (dBm)
TM110 – Rev. 1.3
Overhead Signaling bytes in the IBS Overhead to pass
asynchronous data.
{RS-232, RS-485}
Allows the user to select the interface type.
{7,8}
Allows the user to choose between 7 or 8 bit data.
{ES-ES, ESC ENHANCED}
ES-ES is the normal IBS Async Channel. ESC
Enhanced ca be selected in Closed Net and uses the
Overhead Signaling bytes in the IBS Overhead to pass
asynchronous data.
{RS-232, RS-485}
Allows the user to select the interface type.
{150 - 19200}
Allows the user to select the baud rate in Enhanced
Async Mode. Available rates are listed in Table 3-3.
{7,8}
Allows the user to choose between 7 or 8 bit data.
Displays a history of events recorded in the event buffer.
A maximum of 100 events may be stored in the buffer.
st
Upon receipt of the 101
is automatically deleted, and so on, maintaining the
maximum 100 events.
Allows the user to clear the contents of the Event Buffer
by pressing <CLEAR> on the keypad..
Displays the estimated receive signal level as seen by
the Demodulator.
User Interfaces
event, the first received event
4-19