Appendix E - Efficient Drop & Insert; Introduction; Prerequisite - Radyne DMD2050 Operation Manual

DMD2050 Universal Satellite Modem
Efficient Drop & Insert
E.0

Introduction

The following paragraphs describe the menu structure and procedure for configuring a Radyne
DMD20 / DMD2050 / DMD50 modem for Efficient Drop & Insert Mode.
E.1

Prerequisite

In order for a modem to be configured for efficient Drop & Insert, the modem must have a G.703
Interface card installed and Open Network Drop & Insert must be enabled. If you modem does
not have the required hardware and/or feature set enabled, you will need to contact your Radyne
salesperson to order the appropriate hardware and/or feature set upgrade. If your modem has
the appropriate hardware, but the software revision is prior to AY, you will need to download the
latest modem firmware from the Radyne FTP website.
The following menus illustrate how to determine whether or not your modem has the required
hardware and feature set options.
SYSTEM
HW/FW CONFIG
FIRMWARE
F05058-AY 6.1
SYSTEM
HW/FW CONFIG
TERR INTFC BRD
01-AS/4975
SYSTEM
HW/FW CONFIG
FEATURES
UPGRADE LIST
D&I
INSTALLED
ENH ASYNC
INSTALLED
AUPC
INSTALLED
TM110 – Rev. 1.3
or later required
or equivalent required
required
optional, required if desired
optional, required if desired
Appendix E
E
E
-1