5-2.3 Dos/Windows 3.1X - SOLTEK 75FRN2 Series Manual

7. Choose "Yes" when asked whether you want to start your computer. Be
sure to remove the diskette from drive A.
5-2.2-7 Confirming Driver Installation in Windows 98/95
To confirm that the driver has been properly loaded in Win 95/98, perform
the following steps:
1. Choose "Settings" from the "Start" menu.
2. Choose "Controller Panel", and then double-click on the "System" icon.
3. Choose the "Device Manager" tab, and click the "+" in front of "SCSI &
RAID controllers." "Win95-98 Promise FastTrak 376 controller"
should appear.

5-2.3 DOS/Windows 3.1x

For first -time installation, follow the standard procedure of installing DOS
on to your hard disk (partition all hard drive with FDISK and format be-
fore performing the following procedure):
1. Insert "Disk 1" of your DOS installation diskettes into drive A:.
2. Type "A:\SETUP" at the "A:\" prompt.
3. Continue with normal DOS installation procedure, and refer to your DOS
manual for additional details.
Note:
The FastTrak 376 BIOS supports both DOS and Windows 3.1x
without software drivers installed.
Chapter 5 RAID Controller
95