Lamp; Lamp Expiry Hours - Christie CP2208 Installation And Setup Manual

Lamp

Type
Power (software adjustable)
CDXL-14M (1.4kW)
CDXL-16M (1.6kW)
CDXL-19SC
CDXL-21S1 (2.1kW)
The ballast is power regulated and has a maximum current of 97A. Therefore the maximum power
specification for a given lamp may not be achievable until the lamp has aged, since lamp voltage
increases with hours of use.
Projectors typically force a 10 minute cool down period. Ensure you do not re-strike the lamp any
sooner than two minutes into this cool down period since hot re-strikes reduce lamp life. The period
required to reach full brightness is 20 minutes (maximum).

Lamp expiry hours

This table specifies the maximum hours the projector lamp can operate before replacement:
Lamp Type
CDXL-14M
CDXL-16M
CDXL-19SC
CDXL-21S1
CP2208 Installation and Setup Guide
020-102031-01 Rev. 1 (09-2015)
Xenon Short Arc Lamp
700W min., 1430W nom., 1575W max.
1000W min., 1600W nom., 1760W max.
1260W min., 1900W nom., 1900W max.
1260W min., 2100W nom., 2300W max.
Expected Life
3500 hours
3500 hours
1500 hours
1500 hours
Projector specifications
31