Configuring System Information; Figure 5 Normal Setup Dialog - PACOM PDR-4L Manual

System: System Information, Date/Time, System Check, and System Log Setup
Devices: Camera, Alarm-In, Motion Detector, Text-In/PTZ, Alarm-Out, Audio, and
RS232 Setup
Record: Time-Lapse Record and Pre-Event Record Setup
Event Action: Alarm-In Action, Motion Action, Text-In Action, and Video Loss Action
Setup
Network: Network and Callback Center Setup
Password: Password Setup
Live Monitoring: Sequence Dwell Time Setup, and OSD Setup
Configuration: Quick Setup, Load Default Setup, and Clear All Data Setup

3.3 Configuring System Information

Set up System Date/Time
0PATH: MENU ▶ System ▶
1. Move to the Date/Time field, and press
arrow buttons and change the field using left/right-arrow buttons on the front panel.
Finish the setting by pressing
NOTE: If you change the system time, the DVR will restart.
NOTE: The newly set time starts upon selecting OK and entering the Admin password.
2. Move to the Time Zone field, and press
shown.
3. Move to the Daylight Savings Time field, and select either On or Off.

Figure 5 Normal Setup Dialog

Date/Time0
. Change the values using the up/down-
ENTER
.
ENTER
to select the proper time zone from the list
ENTER
Four-Channel Digital Video Recorder
13