Devices Setup; Camera; Figure 27 Devices Menu - PACOM RDRH-EL104 User Manual

User's Manual
NOTE: You will need to get the IP Address or domain name of the SMTP Server from your
network administrator.
NOTE: You can use the domain name instead of IP address if you already set up the DNS
Server when setting up the LAN.
Highlight the box beside Port and press the
Server port number obtained from your system administrator. The default port number is 25.
Highlight Enable SSL/TLS and press the
On, the DVR can send an email via an SMTP server requiring SSL (Secure Sockets Layer)
authentication.
NOTE: This product includes software developed by the OpenSSL Project for use in the
OpenSSL Toolkit (http://www.openssl.org/).
Highlight the box beside Sender and enter the sender's e-mail address. Use the virtual keyboard
to enter the e-mail address.
NOTE: The e-mail address must include the "@" character to be a valid address.
Highlight the Test box and press the

Devices Setup

Camera

Highlight Camera in the Devices menu and press the
30
Highlight the box beside Type and press the
You can select between Manual and listed SMTP mail
server providers.
Highlight the box beside SMTP Server and press the
button. A virtual keyboard appears that you can use to
enter the IP address or domain name of the SMTP server.
button. Use the arrow buttons to enter the SMTP
button to toggle between On and Off. When it is
Highlight the box beside Authentication and press the
Authentication screen appears.
Highlight Use and press the
Highlight the box beside User/Password and press the
A virtual keyboard appears allowing you to enter the user ID and
password.
button to test emailing with the current settings you made.
Figure 27 Devices menu.
button to toggle between On and Off.
button. The Camera setup screen appears.
button.
button. An
button.