Power Led; Panic Button; Alarm Button; Clip Copy Button - PACOM PDRH-8-RT User Manual

Power LED

The Power LED is lit when the unit is On.

PANIC Button

Pressing the button starts panic recoding of all camera channels, and displays
PANIC
button again will stop panic recording.

ALARM Button

The button has two functions. First, it will reset the DVR's outputs including the internal buzzer during an
ALARM
alarm. Second, it will display the event log when you are in the live monitoring mode unless there is an active alarm.
This operation can be user password protected.

CLIP COPY Button

Pressing the button allows you to copy video clips.
CLIP COPY

ZOOM/PTZ Button

Pressing the button zooms in the current image in double on the screen. You can use the arrow buttons to
ZOOM/PTZ
move the rectangle to another area. Pressing the
Pressing and holding the button for three seconds or longer enters the PTZ (Pan/Tilt/Zoom) mode and the PTZ icon
flickers. Pressing the button again exits the PTZ mode. Pressing the arrow buttons or
you to control properly configured cameras.

DISPLAY/SPOT Button

Pressing the
DISPLAY/SPOT
3x3 and 4x4.
Pressing and holding the button for three seconds or longer allows you to select which cameras will display on the
Spot monitor.

GROUP/SEQUENCE Button

When in the live mode, pressing the
to the next camera group, and the screen displays the page number. Pressing and holding the button for three seconds
or longer displays live channels sequentially.

PLAYBACK Button

Pressing the button enters the playback mode, and pressing the button again exits the playback mode.
PLAYBACK
When entering the playback mode, video is paused. Pressing the
speed. The screen displays when the DVR is in the Pause mode and the screen displays
back video.
When in one of the multi-view formats, pressing this button enters the Triplex mode. The DVR supports the Triplex
function: monitoring, recording and playing back at the same time.
(Play/Pause) button zooms in the image in rectangle.
button toggles between different display formats. The available formats are: PIP, 2x2,
GROUP/SEQUENCE
button changes the screen from the current camera group
(Play/Pause) button plays back video at regular
Digital Video Recorder
on the screen. Pressing the
button allows
MENU/CAMEO
when the DVR is playing
9