Diagnosis And Testing - Illuminated Entry; Transmission Range Indicator Illumination Description - Chrysler 2004 Concorde Service Manual

Hide thumbs Also See for 2004 Concorde:

Table of Contents

LAMPS/LIGHTING - INTERIOR

ILLUMINATED ENTRY (Continued)

DIAGNOSIS AND TESTING - ILLUMINATED

When testing the system, all doors must be closed

to prevent courtesy lamps from lighting. Verify that

remote keyless entry system is operating properly

before testing illuminated entry circuits. The body

controller uses input from the remote keyless entry

system to switch ON the courtesy lamps.

Refer to Wiring Diagrams, for component location

and circuit information. Refer to the proper Body

Diagnostic Procedures manual for complete diagnos-

tic information.

TRANSMISSION RANGE

INDICATOR ILLUMINATION

The floor console mounted Transmission Range

Indicator Lamp display utilizes electroluminescent

technology as the light source. The only diagnostics

that should be performed is to check for the presence

of 12 volts on the mating wire harness connector. The

electroluminescent lamp requires a 120 volt AC sig-

nal that is provided by a power converter included in

the assembly. Because of a potential shock hazard,

diagnostics testing of the electroluminescent lamp

and power converter should be avoided. The module

is not serviceable. Refer to Body, Floor Console Shift

Bezel Removal and Installation.

Chapters

Table of Contents