Chrysler 2004 Concorde Service Manual page 195

LH
COOLING (Continued)
STANDARD PROCEDURE - ADDING
ADDITIONAL COOLANT
CAUTION: Do not use well water, or suspect water
supply in cooling system. Use only a 50/50 mixture
of the specified ethylene glycol type antifreeze/cool-
ant and distilled water. (Refer to LUBRICATION &
MAINTENANCE/FLUID TYPES - DESCRIPTION).
When additional coolant is needed, it should be
added to the coolant pressure bottle.
For coolant service schedules (Refer to LUBRICA-
TION & MAINTENANCE/MAINTENANCE SCHED-
ULES - DESCRIPTION).
WARNING: DO NOT OPEN COOLING SYSTEM
WHEN HOT AND UNDER PRESSURE BECAUSE
PERSONAL INJURY AND SERIOUS BURNS FROM
COOLANT CAN OCCUR. ALLOW ENGINE TO COOL
BEFORE SERVICING COOLING SYSTEM.
(1) Try squeezing the radiator upper hose to deter-
mine if the system is still pressurized.
(2) Place a shop towel over the pressure cap and
turn to the first stop. Wait to see if any pressure is
released. When no pressure is released, press down
on the cap and turn to the second stop. Remove cap
(Fig. 7).
NOTE: If the coolant pressure bottle is completely
empty, (Refer to 7 - COOLING - STANDARD PROCE-
DURE - COOLING SYSTEM FILLING).
(3) If there is some coolant in coolant pressure bot-
tle, slowly fill coolant pressure bottle.
Fig. 7 COOLANT BOTTLE LOCATION
1 - COOLANT RECOVERY PRESSURE BOTTLE
2 - PRESSURE CAP
SPECIFICATIONS
TORQUE
DESCRIPTION
A/C Condenser to Radiator -
Bolts
A/C Belt Tensioner & Pulley (2.7L)
- Bolts
A/C Belt Tensioner Pulley (3.5L) -
Nut
Engine Block Heater
Cooling System Bleed Valve -
(2.7L)
Cooling System Bleed Valve -
(3.5L)
Condenser Inlet Tube Bracket
Screw
Engine Oil Cooler - Lines to
Engine
Engine Oil Cooler - Lines to
Radiator
Engine Coolant Sensor
Radiator Fan to Radiator -
Screws
Generator/Power Steering Belt
Tensioner Pulley - Nut
Thermostat Housing
Transmission Oil Cooler - Hose
Clamps
Transmission Oil Cooler - Flare
Nuts at Trans
Water Pump - Bolts
Water Outlet Connector - Bolts
COOLING 7 - 11
Ft. In.
N·m
Lbs. Lbs.
5 — 45
28 — 250
54 40 —
12 — 105
12 — 110
8 — 70
5 — 45
30 — 260
18 — 160
28 20 —
5 — 45
54 40 —
12 — 105
3 — 28
30 — 260
12 — 105
12 — 105