Excontrol Menu - MUTOH ValueJet 1304 Service Manual

5 Self-Diagnosis Mode

5.15 ExControl Menu

In this menu, you can diagnose the equipment on the controller board.
Items
Version Firmware, board revision
Sensors Pre-heater thermistor, platen heater thermistor 1 and 2,
after-heater thermistor, ink ID for each cartridges, ink
NOT sensor for each cartridge, ink END sensor for each
ink.
Heater Pre-heater, platen heater, after-heater
History Maintenance history confirmation
5.15.1 Version
In this menu, you can check the ROM version of the controller board firmware, and the version of the
controller board. The firmware version (AP version) is displayed as "XX.XX". The controller board version
is displayed in hex format (2 digit).
Rev.-01
CS9050, CS9150
Table 5-24 Controller Board Check Item
Contents
[>] key
[>] key
[>] key
[>] key
[>] key
[>] key
5-74
VJ-1304 Maintenance Manual
Remark
-
-
-
-
[<] key
[<] key
[<] key
[<] key
[<] key
[<] key