Headwash Menu - MUTOH ValueJet 1304 Service Manual

5 Self-Diagnosis Mode
5.7.9

HeadWash Menu

This menu is used to purge ink and clean the heads at the end of the manufacturing process and before print
head replacement.
The actual procedure is as follows.
1. Press [Enter] key in the operation panel to determine the Head Cleaning Menu.
2. Remove all ink cartridges.
3. Press [Enter] key in the operation panel to discharge ink.
4. After ink is discharged, install the head cleaning jig.
5. Press [Enter] key in the operation panel to charge shipping liquid.
6. After shipping liquid is charged, remove the head cleaning jig.
Rev.-01
CS9050, CS9150
Remove all cartridges and press [Enter] key to discharge ink
Finish Ink Discharge
Set cleaning jig and press [Enter] key to charge shipping liquid
After shipping liquid is charged
Remove cleaning jig and press [Enter] key to discharge
5-44
VJ-1304 Maintenance Manual
shipping liquid