Firmware Upgrades - HID Fargo DTC1000Me User Manual

DTC1000Me/DTC1250e/DTC4250e Card Printer User Guide, PLT-01668, Rev 1.1
7

Firmware Upgrades

7.1 Upgrade Information
To upgrade the printer's firmware, perform the following steps:
1. Run the FARGO Workbench Printer Utility.
2. If running FARGO Workbench Version 3 or greater:
a. Choose the Update Manager Workbench Utility.
b. Select the printer(s) you wish to update.
c. Click on the Select Firmware file... radio button to locate or enter this latest firmware file
(FRW-00373_DTC100_v2.3.3.20.frm).
d. Search for the firmware file or enter its name then click Open.
e. Click on the Begin Updating Firmware button to send the file to the printer(s).
3. If running a FARGO Workbench release prior to Version 3:
a. Choose the Application Menu at the upper left and select Upgrade Firmware.
b. Enter the firmware file name or press the Browse button to find and select this latest
firmware file
(FRW-00373_DTC100_v2.3.3.20.frm).
c. Click the OK button to send the file to the printer(s).
4. Restart the printer if it does not restart automatically.
Page 78 April 2014