Chapter 6: Firmware Upgrades; Upgrade Information - HID Fargo DTC5500LMX User Manual

Firmware Upgrades
6.1

Upgrade Information

To upgrade the printer's firmware, perform the following steps:
1. Run the FARGO Workbench Card Printer Utility.
2. If running FARGO Workbench Version 3 or greater:
a. Select the Update Manager utility.
b. Select the printer(s) to update.
c. Select the Select Firmware file option to locate or enter the latest firmware file
(i.e. FRW-00373_DTC100_v2.3.3.20.frm).
d. Locate the firmware file and click Open.
e. Click Begin Updating Firmware to send the file to the printer(s).
3. If running a FARGO Workbench release prior to Version 3:
a. Select the Application Menu at the upper left and select Upgrade Firmware.
b. Enter the firmware file name or click Browse to find and select the latest
firmware file (i.e. FRW-00373_DTC100_v2.3.3.20.frm).
c. Click OK to send the file to the printer(s).
4. Restart the printer if it does not restart automatically.
November 2015
Chapter
PLT-02496, Version: 1.0
6