Upgrading The Printer Firmware Using The Workbench Printer Utility; Requirements; Upgrade The Printer Firmware - HID DTC1000 Ethernet User Manual

NET Lower
LED
Upgrading the Printer Firmware using the
Workbench Printer Utility
An alternative method of firmware upgrade.
The Printer Firmware upgrades are done with the same procedure as the USB-
connected Printer. The PC doing the upgrade must have a Driver installed for the Printer
to be upgraded.

Requirements

•
Internet Access
•
Printer is powered up and connected to PC

Upgrade the Printer Firmware

Step Procedure
1 Open the Workbench Printer Utility by using the Diagnostics button from the
Card Option Printing Preference page. The Workbench is also available from
the Folder in the Windows Program folder.
2
From the Application Icon.
Select Upgrade Firmware.
3
Find the Firmware via Check for Firmware Updates at
• Save the file to a folder.
• Use the Browse button to find the .frm file.
DTC1000/4000/4500 Ethernet User Guide – Installation Guide
On twice per second
Off once per second
(i.e., more ON than OFF)
Off twice per second
On
Off
Blinking, off 1/3 second
The IP address is not configured.
The Download mode is for updating
the Ethernet interface.
There is a system error.
The Network link is present.
The Network link is not present.
The Network link is present and
transmitting. It flashes off for one-third
(1/3) second each time a packet is
transmitted.
See:.Upgrading the Print Server
www.hidglobal.com
L001411 (Rev.1.0) 45