HID Fargo DTC1000Me User Manual page 43

Setting
Head Queue Offset
Head Card Thickness
Offset
Head Smart Card Engage
Offset
Head Mag Offset
Overlay Heat Adjust
10 Mil Card Queue Offset
Erase Speed
Standard Resin Head
Adjust
Printhead Smart Cue
Offset
April 2014
DTC1000Me/DTC1250e/DTC4250e Card Printer User Guide, PLT-01668, Rev 1.1
This setting is a calibration driven value and should not be
adjusted. If the printhead assembly is replaced then this value
may need to be adjusted.
This setting is factory set and should not be changed unless
directed by a technician.
Adjusts the card handling path to allow for variances in card
thickness.
Adjusts the position of the print head to allow smart card encoder
contact.
Adjusts the printhead for magnetic encoding.
Adjusts the temperature setting for overlay film.
Adjusts the input queue for use with thick cards.
Adjusts the speed of the erasure process.
Use this adjustment for Black standard resin text and barcodes if
they appear faded, too light or too dark.
Maximum Adjustment Range is +/- 100.
This control can be helpful for fine-tuning the transfer of resin text
and bar codes.
Adjusts the card handling path to allow for variances in card
thickness.
Description
Page 43