Cleaning Kit - HID Fargo DTC1000Me User Manual

4.4.2

Cleaning Kit

ESD : As with any electronic device, internal components of the printer, such as the
printhead, may be damaged if exposed to static electrical discharges. To avoid potential damage,
always wear an appropriate personal grounding device, such as a wrist strap (with integral resistor)
connected to an ESD ground.
This Cleaning Kit provides you with the specialized cleaning supplies and the required cleaning
procedures for you to maintain your card printer/encoder. The following cleaning procedures will
require less than 10 minutes.
Four (4) Printhead Cleaning Swabs are pre-
moistened with 99.99% isopropyl alcohol for
cleaning your printer's printhead.
Three (3) Alcohol Cards are premoistened with
99.99% isopropyl alcohol for cleaning your
printer's platen, and card feed rollers.
Ten (10) Cleaning Cards are provided with
adhesive backing for cleaning your printer's
platen and card feed rollers.
April 2014
DTC1000Me/DTC1250e/DTC4250e Card Printer User Guide, PLT-01668, Rev 1.1
Description Supplies (pictured)
Page 35