12V And Pump Controls (Single Axles); Battery Voltage; 18. Unicorn Iii Control Panels - Bailey Pursuit Owner's Manual

18. UNICORN III CONTROL PANELS

The control panels in the Unicorn III models
consist of two separate switching blocks.

12v and Pump Controls (Single Axles)

1. 12v main switch: 0 = OFF, 1 = ON.
2. LED "pump run": this LED is lit (yellow)
when the pump is actually running.
3. 12V water pump switch: 0 = OFF, 1 = ON.
12v and Pump Controls (Twin Axles)
1. 12v main switch: 0 = OFF, 1 = ON
2. LED "pump run": this LED is lit (yellow)
when the pump is actually running.
3. 12v water pump switch: 0 = OFF, INT=
internal water pump ON; EXT= external water
pump ON.

Battery Voltage.

1. Button to check the voltage (in volts) of the
connected 12v battery.
49