Operation Procedure; Wattage Output; Controls; Setting The Clock - Bailey Pursuit Owner's Manual

1. Information Screen
2. Auto cook: Used to cook using a programme
or to reheat.
3. Defrost: Used to defrost foods by weight or
time.
4. Power: Used to set power level.
5. Clock: Used to set the clock.
6. Weight and time dial knob: Used to set the
time and weight.
7. Start/Easy cook: Used to start the oven
operation and also increase the reheat time
by 30-seconds.
8. Stop/Clear: Used to stop the oven operation
or to erase all entries.

Operation Procedure

This section includes useful information about
oven operation.
1. Connect the mains lead to an electrical
outlet.
2. After placing the food in a suitable container,
open the oven door and put it on the glass
tray. The glass tray and roller guide must
always be in place during cooking.
3. Shut the door. Make sure that it is firmly
closed.
4. The oven light is on only when the microwave
oven is operating.
5. The oven door can be opened at any time
during operation by pulling the handle. The
oven will automatically shut off.
6. Each time a button is touched, a BEEP will
sound to acknowledge the touch.
7. The oven automatically cooks on full power
unless set to a lower power level.
8. The display will show ":0" when the oven is
plugged in.
9. Time clock returns to the present time when
the cooking time ends.
10. When the Stop/Clear button is touched
during the oven operation, the oven stops
cooking and all information retained. To
erase all information (except the present
time), touch the Stop/Clear button once
more. If the oven door is opened during the
oven operation, all information is retained.
11. If the Start button is touched and the oven
does not operate, check the area between
the door and door seal for obstructions and
make sure the door is closed securely. The
oven will not start cooking until the door is
completely closed or the programme has
been reset.
Make sure the oven is properly installed and
plugged into the electrical outlet.

Wattage Output

The power level is set by pressing the
power button.
If you touch the power button once, the
power level will be at 100%, if you press it
twice the power will reduce by 20% and each
subsequent time it is pressed the power will
reduce by 20%. If it is pressed 6 times the
power will go back up to full again.

Controls

Setting the Clock

When the oven is first plugged in, the display
will flash ":0" and a tone will sound. If the AC
power ever turns off, the display shows ":0"
when the power comes back on.
1. Press the Clock button. This is a 12-hour
clock system.
2. Press the Clock button once more. This is a
24-hour clock system.
3. Turn the dial knob to adjust hour.
4. Press the Clock button.
5. Turn the dial knob to adjust minute.
6. Press Clock button
This oven has multiple clock systems.
i
If you want the 12-hour clock system
omit this step.
101