Truma Combi 2 E Uk; Combi 4 E / 6 E Version Uk - Bailey Pursuit Owner's Manual

74
"Fan failure"
• Combustion fan speed too low. Bearing may
be stiff after a period of disuse.
• Automatically clears after 5 mins. Please
try again.
"Connection failure"
• Loose connection between Alde control
panel and boiler.
• Unplug cable at the control panel and
boiler, then carefully plug back in.
• Check there is slack on the cable at the
control panel, but not excessive weight
from free-hanging/unmanaged cable.
"Window open"
• Optional window sensor has triggered, gas
heating is suspended. Automatically clears
and gas heating resumes when window is
closed.
"Connection fail ext"
• Break in communications between Alde
control panel and daisy-chained third party
control panel.
• Check the cable between the Alde control
panel and third party control panel.
"Low battery"
• 12v supply to boiler has dropped below
10.5v, possibly causing system brownout.
• Automatically clears when 12v supply
reaches 11v.
"No match Heater/Panel"
• Control panel is incompatible with boiler
PCB.
• Check control panel part number. Control
panel 3020-013 is for 3020 A-series boiler,
3020-113 is for 3020 HE-series boiler.
If problems persist, please contact Alde, or
your dealer or installer.
For frequently asked questions, or download
all instruction manuals, please visit Alde's web
site at:
www.alde.co.uk

TRUMA COMBI 2 E UK

COMBI 4 E / 6 E Version UK

1. Control Panel
2. Power Selector Switch
3. Time Switch ZUCB (Accessories)
4. Room Temperature Sensor
5. Cold Water Connection
6. Hot Water Connection
7. Gas Connection
8. Hot Air Outlets
9. Recirculated Air Intake
10. Waste Gas Discharge
11. Combustion Air Infeed
12. Electronic Control Unit
13. Water Container (10 litres)
14. Burner
15. Heat Exchanger
16. Power Electronics
17. Heating Elements 230V
18. Overheating Switch 230c
(Not supplied on Pursuit Range)
19. FrostControl (Safety/Drain Valve),
20. Safety Drain Valve